CAPTOR-C: detection of control points by dial indicator
Examples, News — 1 December 2011 at 6:56 pm
We are proud to inform you of the launching of CAPTOR-C system, recently patented by Tecnomatrix. CAPTOR-C aims at detecting the correct positioning of the dial indicator on each control point (SC) of your checking fixture, as well as the identification of the point being measured. This system, an extension to CAPTOR-S system, enables to collect measurement data in a quicker and more reliable way, and prevents...
read more
Checking Fixtures Design
Automated Go/No Go checking fixture
In this video you can see a simple example of automation of a checking fixture controlling characteristics of a part by...
18 April 2011 14:34
Examples
CAPTOR-C: detection of control points by dial indicator
We are proud to inform you of the launching of CAPTOR-C system, recently patented by Tecnomatrix. CAPTOR-C aims at detecting...
1 December 2011 18:56
Technical Specifications
How to Write Technical Specifications: a Handbook
Some time ago, we published an article about the importance of writing technical specifications when requesting for a quotation...
28 March 2010 17:58
Metrology
A revolution in Metrology ! The FlexCal
Do you need to measure components rapidly and accurately in production?
Do you need to measure inaccessible areas of your...
1 July 2011 16:47
Últimos Artículos
CAPTOR-C: detection of control points by dial indicator
We are proud to inform you of the launching of CAPTOR-C system, recently patented by Tecnomatrix. CAPTOR-C aims at detecting the correct positioning of the dial indicator on each control point (SC) of your checking fixture, as well as the identification of the point being measured. This system, an extension...
1 December 2011 | Examples, News | Read More
A revolution in Metrology ! The FlexCal
Do you need to measure components rapidly and accurately in production?
Do you need to measure inaccessible areas of your components?
Do you need to measure dimensional and roughness parameters on the same component?
The FlexCal is the answer!
The FlexCal is a rugged and accurate hybrid of a Contour...
1 July 2011 | Metrology | Read More
Example of CAPTOR-R application: control of a welded exhaust pipe
Application to control precisely the position of the different sections of exhaust pipe after their welding process, without extending the process cycle time.
Once the part is mounted on the CMM fixture, CAPTOR-R can take sections of control of position at the beginning and at the end of each section...
20 May 2011 | Machine Vision, Metrology | Read More
Automated Go/No Go checking fixture
In this video you can see a simple example of automation of a checking fixture controlling characteristics of a part by Go/No Go gauges. This fixture is composed of a manual checking fixture to which we have added air cylinders whose air pressure is controlled by manometers, and a PLC that manages the...
18 April 2011 | Checking Fixtures Design, Home | Read More
CAPTOR-R: Vision Measuring System for Gaps and Flushes
Innovate means creating products that will make our lives easier. In the industrial metrology field, there is still a lot to do on that matter. Tecnomatrix has made an important effort to innovate, and the result of this effort is the CAPTOR line of products.
The measurement of gaps and flushes has always...
16 March 2011 | Metrology | Read More
Checking fixture for dashboard central lid assembly
The function of this checking fixture is to check the mountability of the part, and measure its width with two dial indicator points.
The difficulty of this part is that, like many dashboard subassemblies, it has many clips located in all the outline of the part, and not all of them are positionned...
4 February 2011 | Checking Fixtures Design, Examples | Read More
CAPTOR-S : Measurement by Dial Indicator and Wireless Data Collection
As we announced a few weeks ago in this blog, we are proud to present you our new product, CAPTOR-S, a wireless unit to collect data measured by dial indicator that can be used as much on your next checking fixtures as on your existing ones equipped with dial indicator bushings. The data are sent to...
17 January 2011 | Checking Fixtures Design, Examples, Home, News | Read More
Low-pressure Dial Indicators
To measure parts or elements made of soft materials, it is necessary to use low-pressure dial indicators. Most of these dial indicators, for all the brands available on the market, work with a force of 1.5 to 2N. This force can be reduced if we use a flat probe instead of a round probe, if the geometry...
23 December 2010 | Checking Fixtures Design, Quality Control | Read More
We wish you a Merry Christmas and a Happy Year 2011!
Share:
23 December 2010 | Uncategorized | Read More
Do you know the new way of measuring…
We will present you soon, in this blog, a new system developped by Tecnomatrix. This system, called, CAPTOR S will be a revolution of your way of measuring. After one year and a half of development, we are very proud to inform you of its launching. We hope CAPTOR S will represent a major improvement...
17 November 2010 | Checking Fixtures Design, Quality Control | Read More
- 4 February 2011 8:00
- 17 January 2011 12:19
- 23 December 2010 19:46
- 23 December 2010 11:10
- 17 November 2010 19:08
-
CAPTOR-C: detection of control points by dial indicator
1 December 2011 18:12
-
A revolution in Metrology ! The FlexCal
1 July 2011 16:07
-
Example of CAPTOR-R application: control of a welded exhaust pipe
20 May 2011 15:05
-
Automated Go/No Go checking fixture
18 April 2011 14:04
-
CAPTOR-R: Vision Measuring System for Gaps and Flushes
16 March 2011 11:03
|
|
|
|
Our Photos on Flickr
